• 0
  • 0

Introduction to Titanium Carbide TiC Powder

The Introduction of Titanium Carbide TiC Powder

Titanium carbide also known as TiC is a common transition metal carbide with a NaCl cubic crystal structure, high melting point, high hardness with a high Young's modus, high mechanical stability and wear and corrosion resistance and good thermal and electrical conductivity. Therefore, it offers numerous applications as well as a lot of potential for cutting tools, aerospace components, high-wear coatings, foam ceramics, and infrared radiation ceramics materials.

applications of Titanium Carbide TiC Powder

1. It is used to create different multiphase materials

Titanium carbide ceramics belong to super hard tooling materials, TiC and TiN, WC, A12O, and other raw material made of a variety of multiphase ceramics The materials are known for their great melting rate, high hardness as well as excellent chemical stability. is the ideal material for cutting tools, wear-resistant components in addition, they exhibit excellent electrical conductivity which makes them the best choice for electrodes.

Cutting tool material: As a result of some percentages of TiC solid particle dispersion inside the matrix, composite cutting tools do not only improve the toughness however, to a certain extent, improve the strength of the fracture, more than the natural tool cutting performance a lot. A12o3-tic system-based ceramics could be used as armor-grade materials. A tool material the hardness is higher than (C, N) and Ti(C N, C) because of N to allow it to be used on steel and other cutting materials friction coefficient is greatly reduced. Numerous advantages can be gained from cutting. By combining the advantages of Ti and (C N, C) to create multiphase ceramics, a promising tool material can be prepared.

2. For coating purposes, they are used as materials.

Diamond coating: The production method for diamond tools is mostly the impregnation process using powder metallurgy method. Because of the high interaction energy between diamonds and any general metal the diamond surface cannot be penetrated by alloys or metals with a lower melting point which is why its bond performance is poor. In the last few years, many researchers have conducted a variety of studies to improve the bond strength between metal and diamond. The active metal method is the most commonly used that is, for example, adding only a tiny amount of titanium to metal bond, chromium, vanadium, and other active metal, tool for sintering liquid phase that is active. It is high carbon compounds that form elements, and the affinity for diamonds is big, easy to increase the strength of the diamond surface which allows the metallurgical connection of metal bond and diamond. The strength of the interface can be affected by the amount of active metal in the mix, as well as the temperature of sintering and time as well as other variables. It is necessary to achieve for the breaking down of binder in order to ensure the enrichment and enlargement of active metal at the interface as this method isn't suitable for hot press sintering of the diamond and metal powder in a very short solid phase.

3. For preparing foam ceramics

As a filtering device, foam ceramics remove inclusions in all types of fluids and their filtration method is Adsorption and agitation. The filter demands the chemical strength of the product, particularly in the field of metallurgical production with a high melting filter, so this kind of material will be oxidized generally, as well as to adjust to the metal melt, which is the primary goal that is thermal shock resistance. Titanium carbide foams offer higher strength, hardness, electrical conductivity and heat, and also have better resistance to heat and corrosion that oxide foam ceramics.

4. For use in infrared radiation materials

Titanium carbide is an example of intermetallic compounds, which have generally demonstrated good chemical stability, no changes in valence state as well as the system is subject to high-temperature reduction of the preparation of specimens, the titanium ions display a delay phenomena that appear, with the intention of the solid of titanium ions melting into the structure of cordierite position and change in the structure. As compared to a single material that is a single material, the radiation capability of the material in the vicinity of 3tma has obviously improved, which is perfect for use in the area of high temperature.

Main Supplyer of Titanium Carbide TiC Powder

We are a respected global chemical material supplier and manufacturer with over 12 years' experience manufacturing high-end chemicals and Nanomaterials such as silicon powder, nitride powder, graphite powderand zinc sulfide calcium Nitride, 3D Printing Powder and more.

If you're seeking top-quality titanium carbide TiC-C Powder, please feel free to call us or send us an inquiry. (

Inquiry us

  • tags

Our Latest News

The Global Silicon Metal Market introduction and crisol para aluminio supplier

The Global Silicon Metal Market Generally, there are two different types of silicon metals. One is called the Chemical grade and the other is called the Metallurgical grade. These t…

Introduction to crisol para aluminio Additives

Introduction to crisol para aluminio Additives Whether you're…

The decision by major producers to maintain production cuts has had an impact on green mold casting price

The decision by major producers to maintain production cuts has had an impact on green mold casting price…